USRA 0-6-0 | |
---|---|
New York Central (Chicago Junction) 221 | |
Power type | Steam |
Builder | Baldwin, ALCO |
Build date | 1918–1919 (originals) |
Total produced | 255 originals plus copies |
Configuration | 0-6-0 |
UIC classification | C h2 |
Gauge | 4 ft 8 1⁄2 in (1,435 mm) |
Driver diameter | 51 in (1,295 mm) |
Wheelbase | 11 ft 0 in (3.35 m) |
Length | 62 ft 10 in (19.15 m) including tender |
Width | 10 ft 0 in (3.05 m) |
Height | 14 ft ½ in (4.28 m) |
Weight on drivers | 165,000 lb (74.8 tonnes) |
Locomotive weight | 165,000 lb (74.8 tonnes) |
Boiler pressure | 190 psi (1.31 MPa) |
Firegrate area | 33 sq ft (3.07 m2) |
Heating surface: Tubes and flues |
1,748 sq ft (162.4 m2) |
Heating surface: Firebox |
138 sq ft (12.8 m2) |
Heating surface: Total |
1,886 sq ft (175.2 m2) |
Superheater area | 442 sq ft (41.1 m2) |
Cylinders | Two |
Cylinder size | 21 × 28 in (533 × 711 mm) |
Tractive effort | 39,100 lbf (173.9 kN) |
Factor of adhesion |
4.22 |
The USRA 0-6-0 was a USRA standard class of steam locomotive designed under the control of the United States Railroad Administration, the nationalized railroad system in the United States during World War I. This was the standard light switcher of the USRA types, and was obviously of 0-6-0 wheel arrangement in the Whyte notation, or "C" in UIC classification.
A total of 255 locomotives were built under USRA control; these were sent to the following railroads:
After the dissolution of the USRA, the Atlantic Coast Line, Chicago, Burlington and Quincy, Chicago, St. Paul, Minneapolis and Omaha Railway, Gulf, Mobile and Ohio Railroad and Texas and Pacific Railway ordered additional copies of the USRA 0-6-0 design, while the Missouri Pacific Railroad and the Wheeling and Lake Erie Railway ordered only copies.
|